Trac Bar Mount, Axle Side

This is the GenRight Trac Bar Mounting Bracket Kit for the Axle Side. This is the same mount we have have reliably run on our GenRight Jeeps for years! Front Trac Bar Bracket Kit FEATURES: Designed for use on the front axle. Design uses a double shear 3/4" bolt (through a CrMoly Heim) for maximum duribility. The mount is sold as a "universal" size and design, but it can be cut or trimmed to be mounted at any height or position on your axle to match your steering geometry. Designed for TJ and YJ (driverside drop axles) but can be modified to work on CJ's. Laser cut from Super thick 1/4" steel plate, this mount is CNC bent and pre welded. NOTE: Sold each! This mount requires welding to proplerly mount it. It may also require some cutting! A trac bar between the frame and front axle are required, before use. (Frame side bracket FSM1004 ot FSM1005, sold separately). Designed to work with our 3 link but can be adapted to work with just about anything. Once installed, you MUST cycle the front suspension and steering (in all possible combinations & directions) to make sure NONE of the steering or suspension components will bind or otherwise collide with eachother. DO NOT exceed the range of motion which would damage the steering or suspension components and could cause a failure resulting in a loss of steering control!