Synergy Suspension Jeep XJ Front 3 Link Long Arm Kit "Weld-On"

Next product

Synergy Suspension Jeep XJ Front 3 Link Long Arm Kit "Weld-On"

No reviews.

Synergy Suspension's Jeep XJ Bolt or Weld on Front 3 link brackets are designed for Jeep enthusiasts wanting the next level of performance out of their rigs. The kit allows for unlimited, unrestricted wheel travel without increasing under/over steer driving characteristics. The kit can be bolted into place and run or it can be welded to the sub frame to increase strength on the chassis. The link brackets are designed to be used with Synergy Suspension XJ Front Upper and Lower Control Arms. The Control arms will bolt to the stock control mounts on the front axle, making for an easy installation. Optional mounts for tying in cab cages can also be purchased with the brackets.

Key Features:

Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
Front Lower Arms made from high quality crush resistant 2.0" X .250 Wall 1026 DOM tubing
Arms are designed and manufactured to maximize ground clearance
The arms will allow the use of OEM wheels with larger tires without the requirement of an additional wheel spacer
Front Lower Arms features an OEM style bushing for extended permanence & minimized road vibration and the tried and true Currie
Enterprises Johnny Jointsï¾®
Synergy Suspension Double Adjuster Sleeve & Pinch Bolt Assembly: allows for adjustment of control arm length without removing control arm mounting bolt
100% bolt on components assures an easy, trouble free installation with the use of basic hand tools

Kit Includes:

(1) PPM-8230 Frame Bracket Set
(1) PPM-8231 Front Lower Long Arms (Pair)
(1) CUR-9114 Johnny Joint
(1) CUR-9114L Johnny Joint
(1) PPM-3612-14-R Threaded Weld-In Tube Adapter
(1) PPM-3612-14-L Threaded Weld-In Tube Adapter
(1) PPM-SJNR16 Jam Nut
(1) PPM-SJNL16 Jam Nut
(1) PPM-3106 Upper Control Arm Axle Bracket
(2) PPM-1750-120-DOM-24 Tubing

Options:

Synergy Suspension Drop Pitman Arm for Jeep XJ/TJ/ZJ/YJ (PPM-3425) **Required when using Track Bar Bracket & Brace Kit (PPM-8233)**
Synergy Suspension Universal Brake Line Kit
(2) 27" 35ï¾° 10mm Banjo X 3/8-24 Female I.F. Brake Line (PPM-2000-27)
XJ Track Bar & Bracket Kit (PPM-8233)
Deaver Cherokee XJ ('84-01) 4" Rear Springs (DVR-G09)
Deaver 84-01 Jeepspeed Front 5.5" Lift Coil Springs (DVR-CSG9)

Upper Control Arm

1 3/4" x .120 DOM
1 1/4" shank Currie Enterprises Johnny Jointsï¾® at both ends of link for quick adjustability

Frame Brackets

Jeep XJ Front Long Arm Bracket Kit (PPM-8230)
Laser cut and cnc bent from 3/16 steel
Raw finish to allow brackets to be welded to frame if desired

Track Bar, Track Bar Bracket and Brace

Track Bar Bracket & Brace Kit (PPM-8233)
Adjustable Track Bar (PPM-8233-03)
Track Bar build from 1 3/8" solid 1020 steel
Synergy Suspension Double Adjuster Sleeve & Pinch Bolt Assembly: Allows for adjustment of track bar length without removing the track bar mounting bolt
Track Bar Bracket build from laser cut and cnc formed 3/16" steel, weld on axle track bar bracket gussets are included
Track Bar Brace built from 1 1/4" x .120 DOM Designed to transfer lateral loads to both frame rails
All components correct steering geometry to eliminate bump steer
All components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
**NOTE** Bracket and Brace requires 4" Drop Pitman Arm